Javelin Systems Inc Javelin LC PC Desktop "monitor display gone" Questions

...monitor start and dislplay coming after 10 sec display gone. and after on/off monitr. then coming dislplay and after 10 sec gone dislplay. pl . help me what can i do. The inverter on you monitor has ...

display on monitor. monitor displayed no signal and a blank screen when computer boots up. Hello, 1. Check all the connections to make sure they are connected securely and properly. 2. Open your tower

...i plug in the monitor i cant see anything on display, is my onboard port gone bad, motherboard, pliz advise Check the cable fro monitor what is going in PC check the litle tiny pins inside on the ...

...the notebooks display off and enable any VGA monitor connected to it's VGA ports. when pressed again , they will turn of the VGA port and turn on the notebooks display. Thank you for using FixYa!

...monitor since 2007. For last some days in its display, contrast is displayed contineously and runs to 0 value though I set it to 50-55. contrast display remains on screen for long time or else I have ...

display, then your monitor might have gone bad or it might have been set to the lowest brightness (check the setting knob). If swap monitor does not also work, then your Display (VGA) card is suspect,

...monitor into another computer and it works fine. Is the video card on the mother board? Is it bad?? If the monitors works well on a different computer then is either the video card or the video cable ...

display on monitor when turning computer on Please connect the cable from the tower to monitor firmly. If this is gone bad, you can change the cable. Please turn on the monitor and connect it to power

...Monitor has gone black when your pc is on plz remove the monitor cable from the cpu and check if there message displayed in the monitor, if you any message then your monitor is ok, if you dont get ...

...monitor to move the display to the right till the left side is shown. The monitor should have come with a small book with instructions. There might also be a Reset button the will automatically ...