Question about Cuisinart DCC Coffee Makers & Espresso Machines
I need two rubber hoses that supply water to the heating element. Where can I acquire these? I need two rubber hoses for the DCC1200, where can these be purchased? try a auto parts store they should ...
DCC-1200 Coffee Maker The rubber tube on my DCC-1200 is split--can I order new rubber tubes? See post on Cuisinart customer service. The tube can be purchased at Lowes. Clear vinyl 1/2" O.D., 3/8" I.D
Question about Cuisinart DCC Coffee Makers & Espresso Machines
...a result of a defective washer stopper in the reservoir. I took mine apart by gently pulling the rubber washer over the top of the plastic loaded holder. I lightly sanded it with 220 grit paper ...
Question about Cuisinart DCC Coffee Makers & Espresso Machines
...as in the pot. Any solutions? Bought 4/5/07 Order 1 foot of 5236K73 "High-Temperature Silicone Rubber Tubing" from McMaster-Carr. Put the old check valve in the new tubing in the same location ...
Question about Cuisinart DCC Coffee Makers & Espresso Machines
...go through. I had the same problem and just fixed it. The problem with mine is that one of the rubber hoses that goes to the heating element underneath the coffee make was jammed with coffee ...
Question about Cuisinart DCC Coffee Makers & Espresso Machines
...in the base, turning the on button on so that you see the light, and using a pen to press in the rubber button on top of the base (make sure all work bowls, blades, etc. have been removed first). ...
Question about Cuisinart DCC Coffee Makers & Espresso Machines
...the bottom. What else to I need to do to remove the base plate? I had the same problem. There are 4 rubber "feet" that conceal additional phillips screws. These feet are easily removed by lightly ...
...get the replacement hose? I just un-clogged my coffee-maker, fortunately didn't damage the silicone rubber hose. But here's a good place to get replacement hose-- or any other ridiculously obscure ...
...method but still no joy. I took off the bottom plate using a torque screw driver. There are two rubber tubes with clips. Remove the cold water clip end and squeeze out the non-return valve. You ...
Question about Cuisinart DCC Coffee Makers & Espresso Machines
...more) I found out that internally the water line that comes off of the heating element is made of a rubber/silicon material. The heating element is so hot that it scorches or dryrots the tube and it ...
781 questions posted
Usually answered in minutes!
26 Questions
1 Questions
9 Questions
14 Questions