Cuisinart DCC-1200 Coffee Maker "clean setting pot" Questions

...pot/carafe with clean, fresh cold water. Remove and throw away the used paper filter element andrinse out the basket with warm water and put it back on the unit. Now fill the coffee pot/carafe with ...

...clean light came on. I have run several pots of vinegar, unplugged the machine overnight and reset to factory settings and still the machine runs like the lines are clogged. Very slow to make coffee, ...

...pot of fresh water. When the filter stick is plugged up the sensor says its time to clean it, but most people don't know about this fix. I hope this is helpful to you, d_a_larocque. Positive feedback ...

...have been the problem. I removed the filter, ran vinegar through the pot several times as well as cleaned some nasty looking scum out of the water reservoir. I ran 3 pots of water after that. The ...

...pot. The self clean light came on, so I emptied the water and following direction cleaned the machine with one part white vinegar and two parts water, filling it to the top. Everything worked right, ...

...just like it was coffee. You may have to run it through up to 3 times. If the vinegar/water cleaning fails to restore the coffeemaker to normal, you have a deeper issue. This product has a ...

...clean light does go off - however, each time I brew a pot of coffee, it comes on again at the end of the brew cycle. Any help? There is no self clean button on mine, and I have done the above with ...

...clean_feature_coffee_pot Hello there, Not sure if you have solved the problem. I have found the actual owner's manual by researching on line... Hope this helps. Here is the link... ...

clean light. They said to unplug the unit for 1 hour then reset the time clock and the Auto Off setting. This supposedly resets the unit back to the "Factory Settings" If after trying this it does not

...setting of the temperature switch, essentially leaving me with three settings, low, high, and off. 2. Installing a small radio shack switch along the base somewhere to interrupt the voltage to the ...