Craftsman 1/2" Impact Wrench "trigger 1" Questions

1/2 in impact.wont blow air ,wont rotate,no tension on trigger.feel like problem may somehow be in trigger housing.... Yes, if you take it apart you'll find that the trigger isn't allowing air to pass

No pressure when pulling trigger, trigger sticks in handle body When I pull the trigger nothing happens...trigger stays in handle does not retract as if a return spring is broken..anvil does not spin ...

...1/2 impact wrench that is almost brand new, have had no problems with daily use until today when the trigger will not move. The IR231c is equipped with a throttle valve stem (item # 9) that is prone ...

I DESPERATLY NEED A DIAGRAM OR EXPLODED VIEW OF THE TRIGGER MECHANISM OF THE IMPACT WRENCH AS SOMETHING IS MISSING IN MINE. IT HAS NO TRIGGER CONTROL AN RUNS CONTINUOUSLY IN BOTH DIRECTIONS. take it ...

looking for the packing that goes around the trigger stem to keep air from blowing out the bottom of the trigger. I have used water valve stem packing inthe past with success. Get it at your ace ...

...trigger for my craftsman 1/2 impact wrench, mine is broken If your local Sears store can't help you, try looking to see if you have a Snap-On, Corn-well, or Matco tool distributor in your area. Many ...

...triger on my husky impact tool comes off, there is a spring and a rubber piece that fits over the trigger. The plastic trigger will not stay on the trigger. I don't know how to keep the plastic ...

where can i get parts for a cp828h,i need a gromit for the trigger,it just started to work so i undid the plastic screw oposite the trigger & some sort of grommit fell out in pieces it was like ...

cannot depress the trigger and i hear air coming from the trigger area The seal has Probably got old & dry and is no longer sealing..

CP 734 Trigger Broken Need to find a trigger for the CP 734. This is an old wrench but works great. Don't want to throw away just because of a broken trigger. I think the part number is; ...