RTO PasLode 900420 Impulse Framing Nailer  "fan" Questions

After a service with the correct oil and paslode spray cleaner my fan will not operate. I've since taken it apart and find that if I directly connect the battery to the fan +& - then it works fine. I ...

my paslode doesnt work! battery is charged but when i fire the fan makes a wee noise! i opened it and put battery in and pulled trigger and the fan move half a turn. what could this be?fan or wiring? ...

...When contact to work surface led goes solid green, attemps to fire but does not, led goes solid red fan does not start . Remove battery to get flashing green led ,try again W/ same result. Have ...

nail gun won't fire fan works from alternative power source but not when its all put back together. fired once but then packed up again Try this. Take the handle off the tool per the cleaning ...

fan on paslode does not work after cleaning It is activated by the micro switch near the top of the tool. It is pushed on by a metal arm with a roller at the end of it. Now I am going to assume the ...

I have an IMCT which is INOP. Not even the fan I have an IMCT which is INOP. Not even the fan runs, batteries are good--LED is flashing. I connected the battery directly to the fan & it runs. Does

...hold charge.brought new battery, same thing.brought new charger, same thing. put battery in gun, fan runs and then the battery is flat again. if you have bought a new battery and charger , and it ...

...recently started to make loud buzzing springy sound after shooting about 10 nails sounds like the fan (have recently cleaned the gun) took it apart again tested the fan and is running fine so

how do i take of the fan from a paslode im350+ gun ? 1) Remove the 4 bolts at the head, remove filter cap 2) Remove 2 bolts at nose holding the front assembly to the handle 3) Carefully pull the nose ...

paslode fan runs half spped and will not fire unless fan motor is unplugged Paslode fan runs at half speed and will only produce spark if I disconnect the wires to the fan motor and hold down safety ...