Nordic Track NordicTrack Treadmill, A2550 "turn move" Questions

...turn looser and even a half and still nothing?????? just bought the thing and having doubts! I assuming these hex screws are near the rear of the unit. But they should not affect operation unless ...

...belt. Take the cover off, start it up and look at the motor/drive pulley assembly. If the motor turns and the front roller doesn't, tension the drive motor by moving it back. If the front roller ...

...turn to move belt to the right. Be careful not to overtighten the walking belt. If the walking belt has shifted to the right, turn the left idler roller bolt counterclockwise or clock wise 1/2 of a ...

turn it on my friend when I first moved got on it without the key and started walking on it. I don't know where my manual is do you have any suggestions? oil or try 2 move the little button in

my belt on my t25 horizion series moves to one side when i turn it on, how can i stop this? my belt moves to one side when i turn it on see the video and proceed : God bless you You-Tube video ...

turn on, belt moves and turns right off quickly I oiled it, but once I turn it on the belts barely moves then shuts off. see the video and do the same with the rollers bearings. test the drive motor ,

my treadmill belt doesn't move at all Just received my treadmill put it together and turned it on belt moved but I couldn't get the incline to function so I read that it needs to be ...

...move away from that side. So if it's the left side of the belt that's moving close to the rail then tighten the left side and vise versa for right. Turn the unit on and set the speed to about 3. ...

move. Ive only had it for about 2 years. It was working fine before I moved it across a few states. When I unpacked it and turned it on the lights and fan and sounds all came on but the belt wont turn

...treadmill doesn't want to move when I turn it on. Do I need to replace it? please lube the deck belt+rollers bearing front and rear+test the drive belt motor and replace if necessary. God bless ...