Nordic Track NordicTrack Treadmill, A2550 "push button working console" Questions

...button. do you have an idea what the problem is? Thank you Paul hi, check the other push buttons on the control console. if found faulty replace it. it is the only thing u can do in the control ...

...button is pushed. The control console emits several short beeps but the treadmill stays still. The incline/decline buttons raise and lower okay and the control console appears to working. Any ...

...push a button (speed, program select) nothing happens. I do however have the stop and pace button beeping 3 times when you touch, but nothing works. i think your console is shot check connections on ...

...button beeps and tread runs very slow. Push speed buttons and nothing works. Stop button does nothing. Incline is at max and down button does nothing. Is Epix 450MX Model EPTL096056.1. Checked all ...

...button on the consol of my t9600 are ok (light and sound) except these three buttons: start, stop and select. I push on these buttons and there aren't action and no sound like the other butons. Is it ...

...push the "Speed Down" button to turn off the demo mode on the unit. Remove the console key. 4 Reset the console buttons if the incline is not working properly on the machine. Insert the console key ...

...when you push them the console should be Ok. If there is no chirping noise with the push it is a bad console. If everything but the speed works it will probably be your motor controller that is

...Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own. When the belt stops, the incline should self test by raising to its highest incline ...

...push into the board). remove and replace all the connections on the console reattach the console and calibrate by doing the following: 1. With the key off press the speed + and stop buttons at the ...

...console. You can push the buttons on the console and they work too. You cannot see the speed, time, incline or calories burnt, etc. Can you change the illumination setting like in a car? The lights ...