Proform CrossTrainer Treadmill "moving belt" Questions

How do I adjust the walking belt on my treadmill, it's going to the left? I need to move the belt to the right. Also, there are two adjustment holes one on top and bottom. Which one do I use? belts ...

...problems with the belt. The machine runs and the belt moves but when I go to step on the belt it stops moving, I have tried to adjust it like the manual stated but nothing seems to help. Any

...belt/track was not moving. The incline operates as normal and everything else appears to be fine except the track doesn't move. I unplugged the unit and thought it may reset, then pressing start ...

My treadmill walking belt has moved to the right and slips. It slips sometimes when I am walking. Need to know how to move the belt back to the center of the walking pad. PROBLEM: The walking belt is ...

...moving the belt to make the treadmill move. Belt is on and can manually move 1) LUBE the deck belt,you have a WORN deck belt, this happen because you didnot lube according with the schedule ...

when I power up my treadmil the belt does not move. If I step on the side the belt would then start to move until I move my foot. In order of most likely cause. 1) Worn motor belt needs to be changed.

...belt that's moving close to the rail then tighten the left side and vise versa for right. Turn the unit on and set the speed to about 3. Tighten the side that the belt closer to the side rail about a ...

belt. Take the cover off, start it up and look at the motor/drive pulley assembly. If the motor turns and the front roller doesn't, tension the drive motor by moving it back. If the front roller turns

...belt moving. Try manually moving the belt first. If it moves and If it is a newer machine more than likely the motor sensor is telling the control board that the motor is not working and it is ...

i have a proform xp 550s treadmill. The belt i have a proform xp 550s treadmill. The belt won't move. The motor sounds good, and the console works, but the belt won't engage to move change drive belt ...