Precor 9.21 Treadmill "won 39 turn belt" Questions

...won't go around on its o I have a Weslo Cadence C62 treadmill and it hasn't been used in a few years. I tried to turn it on and the power works fine as well as the incline but the running ...

...won't go. Took the hood part off and the incline motor works and moves but it's not moving the belt to make the treadmill move. Belt is on and can manually move 1) LUBE the deck belt,you ...

...won't move The treadmill turns on and begins to count the seconds but the belt won't move. This has happened before and after a few days it starts up again but I am training for a half ...

won't turn Console powers on but when start is pressed nothing happens. Incline works. Console operates as is working. LUBE THE deck belt+ rollers bearing too. God bless you proceed according with

won't turn on. control board is fine and power is on. image 10.2qi motor won't turn on. control board is fine and power is on. 1) Please test the main motor, see my personal TIPS for motor

...won't turn off(the power button is stuck in), the console cycles on it's own, from a blue screen with the word "console", the "speed" screen, and the TV screen. Also will ...

...won't turn on Treadmill has been randomly not starting - no response when touchpad button was pressed. Jiggling the display ribbon cable would usually get it going. Can't get it start at ...

...won't turn back on... Why? Very likely your console went out. I usually check for voltage running to the console (the wires in the back) and if it has juice but will not come on, I replace the ...

won't move - Landice Sprint 8700 My Landice Sprint 8700 powers on and stays on. The elevation buttons work and the treadmill moves up and down. When I press the speed buttons, the screem shows the

...won't turn. Within 30 seconds the error code E2 1 appears. The manual says to re-set and try again but this does not work. I called Sears and got no help whatsoever; they just want to send a ...