Proform 650 Crosstrainer Treadmill "key down error message" Questions

...down while inserting the safety key. If this doesn?t work, click on the help topic entitled ?Alternate Calibration Codes? for key sequence instructions to enter calibration. 2) Press the Stop key one ...

...down while inserting the safety key. Calibration Codes? for key sequence instructions to enter calibration. 2) Press the Stop key one time. The Time window should read EP:2P. Some newer models may ...

...down for a few seconds. "CL11" will appear in the display of the treadmill. 2 Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display ...

...down while inserting the safety key. Press the Stop key one time. The Time window should read EP:2P. Some newer models may also say FP, Pass, or the like. This means that it passes the EPROM test. ...

...key magnet is a bit eroded but engages fine. What could make this happen perhaps a stuck stop button? I had that problem and solved it by removing the red "STOP" cover. The cover pushes against a ...

...Down key. The treadmill will automatically return to 0 MPH. Please allow the unit to stop completely before continuing. 9) THIS IS A VERY IMPORTANT STEP BECAUSE YOU WILL GET AN ERROR MESSAGE IF THIS ...

...down while inserting the safety key. Press the Stop key one time. The Time window should read EP:2P. Some newer models may also say FP, Pass, or the like. This means that it passes the EPROM test. ...

...key in place, hold "ELEVATION UP" and "SPEED DOWN" buttons for 5 seconds. Software version will appear in display window for a few seconds before model displays. Press "STOP" , "ENG1" will appear in ...

down while inserting the safety key. For key sequence instructions to enter calibration. Press the Stop key one time. The Time window should read EP:2P. Some newer models may also say FP, Pass, or the

...Down key. The treadmill will automatically return to 0 MPH. Please allow the unit to stop completely before continuing, press the Stop key once and remove the safety key. If the motor does not run, ...