...belt will not begin once you have programmed the work out desired. Errors 00 through Error 04 check upper PCA memory locations, RAM memory locations and EEPROM checksum during the power up test ...
Question about Cardiozone Exercise & Fitness
belt just stopped, message error E 1, manual says deck oil and check sensor position -- where is the sensor. thank you Unplug your unit, then remove motor shroud have a good light the sensor is either
belt. The readings from the unit in good operationg condition can be used as the benchmark. Compare readings and replace* the deck and/or running belt if necessary. *Some units have a reversible deck.
...unit. Restrict use to people that do not move slower or faster then speed setting. Inspect deck and belt condition. Deck should have a slick smooth surface, free of nicks, grooves, or rough areas. ...
...unit on, check to see if speed sensor light is flashing each time magnet passes speed sensor by moving walking belt with your hand or foot. c. Check speed sensor wire from speed sensor to lower board ...
Question about RTO Exercise & Fitness
...unit. Restrict use to people that do not move slower or faster then speed setting. Inspect deck and belt condition. Deck should have a slick smooth surface, free of nicks, grooves, or rough areas. ...
belt pulses and surges. It also keeps stopping with an E1 error message. It is about two years old and has worked about one of those years. It sounds like the unit speed sensor is out of adjustment or
Question about LifeSpan Fitness Exercise & Fitness
...unit has an E1 error message. We believe it is a lower board failure Hello yes, your correct this could be the lower board with the issue. The lower board could have blown a fuse, which you can check ...
...unit and with your foot proceed to move the belt while doing that hit your start button and see if that error code come up. At this point we are checking the speed sensor to see if it is functional. ...
...unit. Restrict use to people that do not move slower or faster then speed setting. Inspect deck and belt condition. Deck should have a slick smooth surface, free of nicks, grooves, or rough areas. ...
116 questions posted
Usually answered in minutes!
61 Questions
46 Questions
56 Questions
38 Questions
26 Questions