...interlock was a small black arm if I press this in the door will then lock and the machine will carry on in the cycle. Any clues what could be wrong ? Same issue with loose solder joint on the relays ...
Question about Electrolux Washing Machines
...if you have a narrow arm you can feel down where the interlock is and move your fingers around the interlock until it releases the lock maybe the pump is blocked our the interlock needs to be ...
interlock was a small black arm if I press this in the door will then lock and the machine will carry on in the cycle. Any clues what could be wrong ? Remove the front control panel where the controls
...interlock from washing machine I hope yr going to replace it, not run the machine without the lock. The lock is for safety, if a kid tries to grab clothes when it is spinning it can twist an arm off. ...
...catch. it can be released manually, but make sure its unplugged from the mains and you have slim arms its a tight ...
interlock acuator arm can be seen. Take a popcicle stick and gently push on it. It should be springy feeling. If not you have to remove interlock assembly and have a parts store check it for you. Many
interlock switch underneath the lid. Lift lid and somewhere on the right side is a hole. Under it there is a plastic arm, such that the machine won't spin if the lid is open. There should be a plastic
Question about Electrolux Washing Machines
...this a bad timer? The motor is still running and what water is in the bottom is coming out the wash arms, so the motor is getting the "go" sign from the timer, just not the inlet valve. Thanks in ...
...interlock is an important safety feature, after a young boy had his arm removed by a spinning washing machine. You have to fix it, not bypass it. My guess is that is is badly adjusted and the lock is ...
440 questions posted
Usually answered in minutes!
96 Questions
40 Questions
25 Questions
13 Questions
23 Questions