Precor C956i Treadmills with HR / WholeSale "causes treadmill change speeds" Questions

...change speed of treadmill but readout is still (00) . If you can start ,stop ,incline up & dn and change speed without fluctuation and the belt does not stop. Then the speed sensor is working, ...

...change the speed of the treadmill do not work. The left side is still operational and allows me to change the incline and select workouts, but that is not how I prefer to use the treadmill. I removed ...

Noisy precor treadmill motor When I turn the unit on, there is a very loud guttural sound coming from the motor which never goes away. 9/10 on a 1/10 scala.Also, a faint tinny sound is detected from ...

I have a Vulcan sprinter that changes speed for about 5minutes and then goes back to set speed. How can I fix this? Tyr to check the all the wiring harness inside treadmill. If possible remove all ...

not working at all. What does error e1 indicate? HI There, We would need to know the make and model of the treadmill as they are vastly different electronics wise. The error E1 can indicate a ...

...treadmill's running belt during the procedure. Set the on/off switch to the OFF position. Wait a minimum of 10 seconds to allow the internal power supply to discharge. Remove the safety key from the ...

...Treadmill-will not operate since it has been moved. When the speed is set, it will start at the set speed and immediately decrease until it stops. Also, the incline will not operate and none of the ...

...treadmill) 4. Test/change large data cable (use large data cable information provided in the data cable portion of this Guide). 5. Replace elevation motor E7/E9: Solution 1. Certain lower boards have ...

...change the belt speed and the incline of the deck while the belt is in motion. The lift motor generally uses a hydraulic lift to raise and lower the treadmill on its front legs. The elevation motor ...

MOTOR OVER-LOAD E203 begin to explain what you mean E203 according to the technical manual: High Motor Overload caused by one of the following: 1: Runner heavier than weight/speed envelope in ...