Franke Flair Espresso Machine with MilkMate "security screws coffee maker" Questions

...coffee makers No. 198. The handle came loose on the carage. Easy fix. Pry off the cover on the handle to expose two philips screws. Secure the screws back in and pop the cover back on. There are two ...

...coffee maker, and unplug the power cord. Allow the unit to cool for 30 minutes before emptying the water. This gives the water inside the hot water tank an opportunity to cool, helping to prevent ...

...coffee beans). Remove fixing screws (normally philips) securing the bean container platform. Remove grinder's bean intake rubber seal. Unscrew the grinder's fine/course selector, paying close ...

security screws what tool do i use to unscrew my coffee maker? can you tell me where i can buy one if an ordinary srewdriver doesn't work? Just had the same problem. You need to use a Torx T-9 Tamper ...

...a temperature control device, and replace it. You'll also need special Torx bits with the hole in the end ( security-type screws ) to take the coffeemaker apart. Pretty easy job. Mine works great ...

...the power cord entry. Gently work the two halves of the unit until they separate. There is a single security screw in the back, and two tabs on the sides of the case release the two halves. I found ...

...under the plate it will take some specialized tooling to replace might have security screws usually the fuse is crimped  on do not solder replace with same rating some available at radio ...

...screws? Thank you, Robert I used a pair of needle nose pliers to grip the outside of the head of the screw. I looked like mine. I see one that has a triangular hole in it. you might try a set of ...

There are two security screws on my Mr Coffee. What type of screwdriver will take them out.Have not been able to find a picture of the screws to determine what tool to use. TORX