...wont stay lite for more than 60 sec. glow stick gets hot burner lights burns for 60 sec then gas cuts out There are two things which could cause this. First, if there is insufficient air flow, and ...
wont stay lit. I have a Roper Model RGS7648EQ3 (gas) that will light about 50% of the time once it's lit, it shut off heat wise in about 8 minutes even on High Cotton timed dry. I have cleaned out the
wont stay lit. I have a Whirlpool Cabrio WGD6400SW0. The heat will only stay on for about 5 minutes when the dryer is cold. Then I cannot get the heat to come on at all until it is very cold again. It
...wont run Hey GOD IS GOOD !!!! Electric dryer no start does nothing Check dryer Terminal block prongs both outside prongs should give combined 220, and 110 each if u check 1 outside & 1 center ...
...outside a quarter turn with a pair of pliers and accomplish the same thing. My Kenmore He2 gas dryer has the same problem. It makes 3 beeps and wont start. The check lint screen light also doesn't ...
wont heat for more than 10 minutes when cold I have a Whirlpool Cabrio WGD6400SW0. The heat will only stay on for about 10 minutes when the dryer is cold. Then I cannot get the heat to come on at all.
outside..) as we have noticed a lot of lint coming out of the vent. Hope this makes sense! :O) I have the same problem on the electric version. On the inside panel off the back is a schematic diagram.
outside. I take the filter HOUSING out and wash it also. That is, I remove the housing and clean is good! Making sure that the dryer is properly flowing air is a good thing! 5) Squeals,Scrubs,Squeeks:
outside. I take the filter HOUSING out and wash it also. That is, I remove the housing and clean is good! Making sure that the dryer is properly flowing air is a good thing! 5) Squeals,Scrubs,Squeeks:
5 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions
