Question about Kenmore HE2 Washing Machines
...lights on. Model 110.46472500 1. Unit is POWERed on and wash cycle selected. 2. START button pushed. 3. ADD GARMENT light comes on, immediately followed by DOOR LOCKED light coming on. Both stay on. ...
code "rL" means??? Technician here this morning. Replaced mounts I think then said I needed to buy "fresh wash" because I had been using cold water wash mostly. Following his instructions, I put in ...
Question about Kenmore HE2 Washing Machines
...and clothes clean stay lit but all the lights on the knob are flashing. We can hit stop and then put the dial to drain and spin and it will do it, it's just not washing. pcb problem or door ...
Question about Kenmore HE2 Washing Machines
...clean; lights blinking: all the different wash cycles as well as the time left window which shows alternating 21 and F- . Thanks for the help f-21 is a blocked drain pump.remove the bottom panel,if ...
Clean the drain plug and secure it tightly back in place. Put the panel back on. Plug in the power. And this should resolve your issue. Now go tell the wife how hard you had to work to fix her washing
Question about Kenmore HE2 Washing Machines
...washing a load when washer quit. all lights are flashing door is locked and the code of F - on the display. The machine thinks it is flooded. Either your filter trap is clogges or the drain hose is ...
Question about Kenmore HE2 Washing Machines
...clean up later. LEAVE THE DOOR OPEN IF POSSIBLE. When not in use, leave the door open to allow the tub to air out and to keep mold and mildew from forming on the door bellow. I know this may not be ...
Question about Kenmore HE2 Washing Machines
...test. All lights flash, etc., then all blank except "clean clothes" light flashing. What do I do next? Any ideas? Thanks! it sounds like u fixed the problem. have u tried a load of clothing ...
...Clean lights lit. What does this error mean ? This IS the code for drain problem, pull front panel and remove round filter by turning to the left, probably full of change, feel the pump to the right ...
Question about Kenmore HE2 Washing Machines
At first I got an error message of "F" with no number. The washer stopped and the the lights flashed. I checked the drain filter for debris and cleaned it out. It seemed to work after that. I ran ...
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions