Kenmore HE2 Plus Front Load Washer "panel" Questions

How do I replace the control panel? Where is the How do I replace the control panel? Where is the cover for the HE2 attached? You need to remove the top panel before you can remove and replace the ...

...Open the door and take the retaining ring out of the door seal. Peel the door seal off the front panel. Take the screws off the door lock and let the door lock fall into the machine. Take the ...

...drain & spin and was making noises below. i called Affordable Repair and they said the control panel had to be replaced for $200 + labor. i said the noise is coming from u My HE2 front load ...

...of my Kenmore Front Loader Washer HE plus. Where is it located It is just behind the lower panel. Remove the 3 screws from the lower panel (the panel just below the door), the screws are on ...

how do i remove the he2 plus lower panel to clean the filter Their are three small screws at the bottom of the panel (FLOOR LEVEL) once these are removed you can pull out on the bottom of the panel to

...problem or a failed pressure switch. If you are able to unplug the washer and remove the top panel, you can check the wiring connections between the control board and the water level pressure ...

warranty, I am handy is this a fixable item? Possible that the motor has failed or the main control panel is defective. It is necessary that the voltages to the main panel and to the motor are checked

Power outage & now I can't get it back on Possible that the power panel is damaged, if there is power to the panel with no output then the panel must be replaced, click on : panel

My panel said "Sudz" then the washer stopped and My panel said "Sudz" then the washer stopped and the panel reads "controls locked" I have empties the machine and the offending ...

...CCU and MCU to no avail. What next.... Hello, What to check next is if the switches on the lower panel below the one where the door mounts,check that when the panel is off that those switch are ...