...water drained, but how quickly it drained. Check for any clogs or kinks in the drain line. Also check that the pump is not clogged and that no pump impeller blades are missing/broken and that the ...
...water from the tub through the pump filter cavity. Remove the screws attaching the bottom of the bottom panel to the cabinet then pull the panel down and off the cabinet. Place a piece of towel under ...
Question about Kenmore HE2 Washing Machines
...water drained, but how quickly it drained. Check for any clogs or kinks in the drain line. Also check that the pump is not clogged and that no pump impeller blades are missing/broken and that the ...
...impeller that pushes the water into the drain port. Replace it if found defective or worn out. Drain valve/solenoid---The drain valve may have a solenoid with lever that sticks or frozen and prevents ...
...water out because there's a problem with the drain system as the error code indicates. Either the drain hose is clogged or kinked, the pump filter is blocked, the pump impeller is blocked or damaged ...
...impeller. If that's the case replace the water pump. Note: if you have a belt driven washer, check the belt(s) for cracks, as this would be a perfect time to replace the belt(s) if needed. **The most ...
see if there are any foreign objects preventing the pump impeller from rotating.. ie.. hair clips small coins etc etc. Have a bowl handy to capture the remaining water still in the machine. good luck.
...not drain. Where do I start first to find the problem and where? the cost of a water pump is between $40 and, $60 but, you don't need one you only need to clear the obstruction in the pump
Question about Kenmore HE2 Washing Machines
...it and unscrew it. If this doesn't fix it check to see if the impeller on the water pump is bound up. have you checked the brushs on the moter because if the drum dont go round then its the ...
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions