Kenmore HE2 Plus Front Load Washer "clean water pump" Questions

water. You can clean your pumps clean out trap to make sure the pump is working good. Also a drain hose higher than 6 ft off floor will cause pump not to drain all water. Front loaders all have a mold

...water out twist the middle part out and clean the catch and feel around in the boot and the pump and make sure you have it cleaned out.stick the middle piece back in and start the washer or you can ...

...water from the wash tub and minimizing the mess that is associated with cleaning out the drain pump and/or drain lines. If you have questions, or require additional assistance, please let me know. I ...

...clean it out,turn the center piece to the left to remove it but first get a shop vac and vac out any water that's in the tub,then put a towel down or you can use the bottom panel that you removed ...

...water is drained out,then take out the middle clean out piece and make sure nothing else is in the pump and in the hose,put it back together add some water and see if it spins and drains.let me know ...

...clean out the pump.then fill the washer with some water and put it on a drain cycle and make sure it drains,if it doesn't you either have something still stuck in the pump or you damaged the pump and ...

...water out before the Spin cycle, but can't. Usually this is caused by a foreign object that is obstructing the impeller. See my tip on how to access, drain & clean the Drain Pump Filter: ...

...clean up. 5. Here?s a helpful way of quickly removing the residual water. If you own a wet/dry shop vac, remove the drain hose from the standpipe at the wall and pull a vacuum with the shop vac. This ...

pump is probably not moving the water out of the machine fast enough. Even with cleaning the pump out I have seen where the pump doesn't work efficiently enough to satisfy the machine. Replace the