...and the pre wash/add garment lights keep blinking. When the tub is drained, the door unlocks and the lights go off. There is no error code. Anyone experience this before? I have not got a sol
Question about Kenmore HE2 Washing Machines
...error code and it will not drain, I have read the answers about checking/cleaning the pump. when I try to start it the add a garment light will come on, the tub will do a half spin and the door lock ...
Add a Garment, Rinse, Clothes Clean lights lit. What does this error mean ? This IS the code for drain problem, pull front panel and remove round filter by turning to the left, probably full of change
Question about Kenmore HE2 Washing Machines
...it will add hot to bring it up to that temp. You could try turning off the hot or hooking both hoses to cold. The electronics and sensors will try to counteract and may end up with an error code. ...
...add a garment but the door states locked. We get no error codes to indicate what the problem is and are unable to wash any clothes. This machine was a replacement in 2006 for the same one that came ...
...Add Gormet" then shut off bye itself..i did try to unblug and wait 5 minuts..but never work so please can I get any help full information...Thank you Open the front access panel or the lid and ...
...error codes this time. Just sits there with the door locked and add a garmet light blinking. Any ideas? Hi If you have already replaced your CCU you need to replace the door lock mechanism. Also ...
...error code. Also, the door is locked, The add garment, wash, and spin lights are on as well. Hi, you have to unplug the washer from power source. Then remove front lower panel (3 sheet metal screw ...
Question about Kenmore HE2 Washing Machines
error message and Add Garment light on. Any trouble shooting suggestions? The F01 error is a communication error and most likely the cause is a bad central control board. You tried to unplug the power
Question about Kenmore HE2 Washing Machines
add rinse, clothes clean , but door is still in locked position. Ealier in day error code read door locked, forced it into quick cycle and error code changed to f21 First check your washer plug to see
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions