HP LaserJet P2055d Printer "clearing output bin paper jam" Questions

output bin. There is no paper in the output bin. Any ideas? I have removed the covers but cannot find the paper sensors in those areas. Anyone know where to look? I'm hesitant to dig to deeply without

...output bin but there is no visable jam. HP color laserjet 2600n Hi, Just try the steps Jam in output bin - fuser area Error messageJam in output binalternates withOpen door and clear jam DescriptionA ...

output bin". When I open the door, and clear the jammed paper, it still show the problem. There is output sensor where the papers come out, make sure its lowered down, be VERY CAREFUL not to break it.

can't find paper jam in output bin Jamn output bin". When I open the door, and clear the jammed paper, it still show the problem.

...output bin this is a common fault. look where the paper was jammed, you may need a torch. There is a black or white sensor there that has been dislodged. Once clipped back into place it will then ...

...output bin area. 2. Remove any visible media 3. Open and then close the rear door to clear the message. It is possible that the paper may tear when clearing the jam. Be sure to clear any paper ...

...OUTPUT BIN ? I have replaced the rollers, The paper path is clear, I have tested the output bin, fuser and duplexer on another device and still receiving the error. I am in a hospital environment so ...

...Output Bin or the back door of the printer. To avoid damaging the printer, do not attempt to clear a jam in the top output bin by pulling the paper straight out. Again, if jammed paper is visible, ...

...output bin". I have not been able to open an access to clear the jam. How is this done? That part is the fuser unit and is hot if the printer is on. Here are instructions for you. Good Luck! ...

output bin but it is clear if it gives you the paper jam error ..and it is not any that you should check the fuser cause it is the same error when the fuser is defected or not functional ..If you have