2008 Honda Accord "maf iat sensor wires" Questions

Question about Honda Accord

Which are the functional iat sensor wires on an

MAF/IAT sensor connector, Pin #4, GREEN/BLACK is the "sensor ground" and Pin #5, RED/YELLOW is the "sensor input" for the IAT. For the 3.5L engine: At the MAF/IAT sensor connector, Pin

Question about Honda Accord

1 Answer

Where is the IAt sensor on a 1999 honda accord 2.0

...IAT or AIT sensor serves the same function on my car. for me now its zip tied to a mundle of wires that lead to the O2 sensors. that is because of my aftermarket intake. for you if it was like mine ...

Question about Honda Accord

1 Answer

For a 2005 GMC yukon 5.3L what are the wire colors that control the IAT sensor There should only be 2 wires controlling it but there are 5 on the connection as it controls the MAF and IAT with the sa

...MAF and IAT with the sa What color are the 2 wires for the IAT sensor? The intake air temp sensor is part of the MAF sensor so yes there are 5 wires. The two wires that go to the air temp sensor are ...

Question about Lincoln Cars & Trucks

1 Answer

I have a lincoln town car 2003 I have this code po113 IAT sensor 1 circuit high input I changed my MAF and it started up but not like it should can someone please help me out

.../ short to positive ---wiring short to ground ---ground wire defective --IAT sensor---ECM the MAF ( mass air flow) sensor has nothing to do with the fault the fault is in the wiring or the IAT ...

Question about Honda Accord

1 Answer

Where is iat sensor located on 2006 tpyota tacoma 4,ol ?

the air filter box near air filter hose, and is connected with a five wire connector. You cannot replace the IAT sensor alone. Instead a MAF sensor is replaced altogether. Thank you for visiting Fixya

Question about Honda Accord

1 Answer

Iat sensor diagram maf groundthe

iat sensor diagram maf groundthe ok 95 , must be 16v as only that engine has MAF. the sensor is on the air cleaner box, has 2 wires. and the ohms is on the below page. as is the full schematic, and ...

Question about Honda Accord

1 Answer

Replaced the MAF. Still have the P0113 code. Car runs fine. Cannot find another intake air temperature sensor anywhere on the vehicle! Where is it?

...MAF sensor so replacing that was a waste of money=== It refers to intake air temperature (IAT) sensor---circuit malfunction====causes --wiring open circuit/short circuit to positive--wiring short ...

Question about Honda Accord

2 Answers

Mazda 6s IAT or MAF Wiring Schematics

...IAT or MAF Wiring Schematics I'm adding a power model, and need to know which of the five wires is the IAT: Can you list all five by color? Thanks, John G http://tinyurl.com/globalone ...

Question about Honda Accord

1 Answer

How to check a 2009 chev cobolt MAF/IAT 5 wire

...to check a 2009 chev cobolt MAF/IAT 5 wire sensor and what should i get for my reading for the 5 wires/ what color are the two wires for the maf/iat sensor in a 5 wire plug on a 2008 cobalt LS

Question about Honda Accord

2 Answers

IAT and MAF info

IAT and MAF info Hello, I bougt a performance chip for my 2005 mazda6. Directions say to use it to bypass the IAT sensor with it. My IAT sensor is in the clip with the MAF sensor. What wires control ...