2009 Chevrolet Aveo "manifold" Questions

There is a water hose which attaches to the inlet manifold. It attaches via a metal insert. I need the part number for that insert to order it. Keeps on leaking water as it is badly corroded its part ...

'06 chevy aveo vacuum leak at the intake manifold. Is this a common problem with the aveo's? Can it be sealed without removing the manifold? Also, are throttle position sensors a common problem with ...

...for idle speed sensors/MAF/MAP sensors. If the pump was faulty then it would not supply fuel to the manifold. Test it by having a pressure test done on the fuel. ...

Oil leaking from Manifold Gasket bolts Recently started smelling burning oil from car heater. Cleaned engine and oil appears to be seeping from manifold gasket bolts above exhaust pipe (nothing from ...

...on 2004 chevy aveo. the crank sensor is on the front side of the car. right under the exhaust manifold, you are going to see to wires plugs under the ignition coil. one is for the o2 sensor on ...

...you will have to remove the black plastic cover at the front of the engine that covers the intake manifold. Follow the air breather hose from the filter housing to the engine. At the junction of

...the engine mount attaching bolts to 22 ft. lbs. (30 Nm). Install or connect the following: Intake manifold Intake manifold support bracket. Tighten the bolts to 18 ft. lbs. (25 Nm). Throttle cable ...

...we have tthis to figure out. Along with the TCM codes also... :( P0107 OBD II Trouble Code Manifold Air Pressure MAP Barometric Pressure... Code P0300 What Causes It and How to Fix It ...

...as its so simple ,look on the air intake and their should be a take off pipe from teh exhaust pipe manifold so warm air is picked up to stop the venturi from freezing in the intake manifold ,either ...

...Adjusting Bracket Retaining Bolt 20 N.m 15 lb ft Auxiliary Catalytic Converter-to-Exhaust Manifold Nuts and Bracket Bolts 40 N.m 30 lb ft Camshaft Cap Bolts 16 N.m 12 lb ft Camshaft Gear ...