...bonnet whilst catch is being pulled. 1, cable possibly stretched, 2, look at bonnet catch under the coloum to see if wire is attached, 3, try and lie under car and look up the back of the bulkhead to ...
...bonnet open due to a little white plastic link (~1" long, plus (+)shaped) is still connected between the lock assy. and cable assy. Failure to release bonnet lock is only caused by this plastic link! ...
...to open bonnet The hood release is a red lever under the dashboard about shin height. I found the image on a Haynes online manual - Opening the bonnet Mercedes Benz Class 2008 2011 Petrol B180 1 ...
Question about BMW 3 Series
...1" and insert your fingers about a foot left of center. Sweep to the right, and you'll release the secondary catch and the hood will be open. However, if its stuck / broken, then ...... You need to ...
...of the car Swivel the badge (its spring loaded) Insert your ignition key and turn to the left (position 1) The bonnet should pop up Turn the key to the right (position 2) You can now lift the
1 get a flash light and a pair of nose pin plyers. Look behind the broken handle area for a silver thin cable sort of like the cables on the braking system of a bicycle. pinch the cable with the pyers
Hqw do I remove\ replace a1995 lexus ES300 alternator fuse ? Two locations for fuses. 1 under the bonnet near the battery. 2 in the dash above the bonnet release. All are clearly marked
...bonnet to make it be fully closed and flush to the rest of the car many thanks ryan My bonet on my 1 series wont close properly it doesnt appear to be catching in the release lock although the ...
...bonnet otherwise,many thanks Hello We had a 2001 ford 1 ton diesel with the same issue. The plastic hand knob had snapped off. fortunetly we were able to grab onto the cable with a pair of vise grips ...
cant open bonnet Trace the release, and if the design is cable, get a specialist to repair it.
145 questions posted
Usually answered in minutes!
51 Questions
20 Questions
2 Questions
5 Questions
5 Questions