HP Photosmart C5380 All-In-One Laser Printer "turn automatic print report" Questions

...turn on, press the Power button ( ).Reinsert the cartridges, and then close any open doors on the product.If you receive a prompt to print a calibration page, do so. Reconnect the USB cable to the ...

...PRINT AT THIS STAGE. Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet. Wait 30 seconds for the power to get discharged and then plug the ...

...Turn ON the printer. 2. Press and Hold the "Print Photos" & "Red Eye Removal" buttons. 3. Release both buttons. 4. You will see a new screen that says, "Enter Special Key Combo"... The Key combo ...

...Print a self-test report Follow the steps below: Press the Power button to turn on the product. Press Setup on the product control panel. Press the right arrow button until Print Report displays on ...

...Turn ON the printer. 2. Press and Hold the "Print Photos" & "Red Eye Removal" buttons. 3. Release both buttons. 4. You will see a new screen that says, "Enter Special Key Combo"... The Key combo ...

...turn on the product. Touch OK to continue the print job. -- Step four: Make sure that the carriage can move freely The carriage is the device that contains the printhead and moves from left to right ...

...Automatic. Paper size : Make sure this matches your paper. Print in Grayscale : Print a document in shades of gray. Orientation : Specify how the document is positioned on the page. Paper Source : ...

...Turn ON the printer. 2. Press and Hold the "Print Photos" & "Red Eye Removal" buttons. 3. Release both buttons. 4. You will see a new screen that says, "Enter Special Key Combo"... The Key combo ...

...Turn ON the printer. 2. Press and Hold the "Print Photos" & "Red Eye Removal" buttons. 3. Release both buttons. 4. You will see a new screen that says, "Enter Special Key Combo"... The Key combo ...

...turn on, press the Power button Reinsert the cartridges, and then close any open doors on the printer. If you receive a prompt to print a calibration page.Print it Reconnect the USB cable to the port ...