HP Photosmart C5380 All-In-One Laser Printer "printhead carriage jam fix" Questions

carriage is the device that contains the printhead and moves from left to right during printing. The carriage might become stuck on either side or in the middle of the product. If this happens, follow

printhead, and then prints an alignment page. Recycle or discard the alignment page. Video of aligning the All-in-One The following video demonstrates the steps for fixing a carriage or paper jam. The

...printhead, and make sure the carriage moves freely. If the carriage does not move freely, contact Kodak. Remove the printhead and ink cartridges. Reinstall the printhead and ink cartridges, making ...

...printhead carriage unit is. Chances are that when you cleared the jam you dislodged, damaged or otherwise skewed the little calibration strip at the back of the printer. This strip is a clear bit of ...

printhead carriage jammed, how do I fix this? I have Ref # 150126-000931, spoke w/ Mike-support tec 800-387-7618. Hello, Please follow this link to help you trouble-shoot this issue! Printhead and ink

...carriage sensor When the print head does not slam or move left or right, 'only adjusts paper thickness - forward and back'. Suspect paper fuzz and / or dust around the front paper feed area. A can of ...

printhead carriage jam. open printer acess door. clear any obstruction check installation of printhead and ink cartridges close door press ok to continue did all of that it did not fix it what do i do

printhead carriage jam printhead jam left error code 3527 It all depends on who made the product. There are often times simple solutions but they need to be found by searching on the web and talking ...

...printhead carriage back and forth a few times. Solution 2: Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, ...

...printhead makes one pass to end of carriage, returns and parks, printer light stays on non flashing, no error lights. I have left it disconnected, I have tried re-installing, nothing successful, same ...