HP DeskJet D1460 InkJet Printer "hard reset" Questions

hard reset as described in the next section. Performing a hard reset on the unit When the printing unit detects an issue with the cartridge, a software flag is set inside the device. This flag may not

How do you do a hard reset (to factory defaults) on a HP DJ 940c? The easiest way is to unistall the driver and reinstall it.

print. It is a 550 Deskjet Like the above poster said. Clean your print head and check your ink if they are installed properly. If everything still fails. You can always try to hard reset your printer

glass and so on,but no result Hi there ! You computer need to hard reset start or maybe the ink cartridge is jammed : Here is the link on how to solve your problem and just follow this to your printer

....what's up with that? The printer driver (file) is probably damaged (from frequent use); after your hard disk is stabilized (by running "chkdsk /r /x" from a command line [cmd in Run] and setting it ...

...hard reset the printer which may just do the trick, if not, turn the printer on and pull the power while it is on, wait 60 seconds, plug it in and turn it back on. There is a good chance that a ...

Hard Reset,but that did not work this time. hmm normally it should have problem with your door micro switch. you can find it by looking for plunger at side of the door. i did know exactly but you have

...reset the low ink indicator??? This is an HP deskjet 6940 printer It is not uncommon for a refilled HP ink cartridge to register as empty. If it was otherwise filled properly, it should yield the ...

carriage jam carriage does not move proper servicing will solve the problem. try hard reset. rate the solution as fixya if it helps you. Hemantraj, your abuse has been reported.

...Hello, Cartridges are a bit hard to place inside this printer. You can double-check if it is in a correct position. You can also unplug the printer and plug it back to reset its temporary ...