eMachines W3507 PC Desktop "switch" Questions

why wont it power up A) It's lazyB) Too tiredC) It's TuesdayD) The ATX Power On switch is bad, or the Power Supply.Suggest you diagnose by bypassing the Power On switch.Has nothing to do with ...

will not turn on Could be a bad switch or power supply, these are the first things to check besides the power cord and the outlet. You will need a voltmeter to check these things out. If you're not ...

...me change to 256 color...? Ok I think i found your problem. You don't need to install any drivers. Switch your display to 256 colors To switch your display to 256 colors Some games and other

...(plus for red and white or black for positive). You can invert it if it does not light. The power switch labeled "sw" and the reset switch can be connected either way. hope this

repalcing video card in emachine w3611 moniter says ni signal no signal try open your system unit get the memory then put it back then try to switch on your computer

i need to know were the power switch connects to the main board also the hard drive LED and the power LED see manual

I knocked the power switch,power LED &the hdd LED off on my Emachine W3507.Now I don't know where to plug these back in.What pins do they go in the cable connectors are the same color as the pins ...

emachine 2685 no power up The three wires from the start power on switch are not connected to the mother board and I do not have a manual that tells me where to connect these wire to the mother board ...

I have a emachine w2646. I went to turn it on and nothing. The green light is on and the monitor works. I switched to plugs and even went a brought a new power supply. The green light only come on. ...

e machine w 3107 from the power supply where do the wires go? I need a power switch with wire? power supply unplugged from board. ok do you have more info? its usually very simple. the main power from