eMachines T6420 PC Desktop "hdd" Questions

...POWER SWITCH WIRING FOR A EMACHINE T-3095 HI I DID NOT CHECK FOR MOTHER BOARD FOR THE POWER LED,HDD LED AND POWER SWITCH MARKINGS BE FOR I TOOK IT APART. JEFF check on the motherboard there

...comp. on booting press the f8 key then select the last known good configuration, check it take ur HDD to another system plug in secondary and run the hdd check disk and after completing the check ...

how to installing second HDD on emachines t3504 I want to add a second 120 + gig hdd on an e-machine t-3504 running XP. Any concerns or problems to be aware of? You'll get several answers if you ...

unpluged HDD LED PWR S/W and PWR LED for board unpluged HDD LED PWR S/W and PWR LED from board need to know what pin to hook back up to E mechine it's usually written in fine print beside pins. ...

...off front cover. three sets of wires came off. need to know where to reconnect. white/red wire HDD LED, white/green wire POWER LED, white/black wire POWER SW Hi. You may want to check your ...

...at all. Excelent description thanx. I assume you have bought a new PC. If so simply remove old HDD and plug it into the DVD cable on the new PC and boot up. It should read the old HDD, simply ...

Desktop from mother board 3 cables came unplugged 1 is green pwr led 1 is pwr s/w-black ,one is red hdd led i just need to know what order to plug them back in Sorry you are having trouble. Led's have

..., you can't . You need the install disc . You can retreive existing data by extracting the hdd from your desktop and connect it to a healthy computer . Format the HDD afterwards , put it

...the swap file , the faster windows can do this. 4.) Hard drive damage Download a programme called HDD Tune (free again), run it and check for any bad sectors and any RSC errors (shown in red or ...

...1st 2 are power led, next 2 are power switch, next has no pin From the left bottom row 1st 2 are hdd led, next 2 are reset (rst) led, last ob right has no connection. Note the power led and hdd