Acer Aspire One Netbook 8.9" Notebook "boot device priority usb hdd" Questions

...device from the PC when rebooting: some BIOSes will incorrectly try to boot off them. If that doesn't work, enter the BIOS Setup (F2 or Del key at boot) and find the Boot Devices menu, confirm that ...

...BOOT DEVICE CD ROM Try to enter BIOS utility setup and configure the laptop (at the BOOT DEVICE PRIORITY) to try first the CDROM/USB. This should 100% fix this. Still -- how did you formatted the hdd ...

...priority can be changed by pressing F1 or F2 during startup, then finding the option for boot order in the BIOS. Be sure to save the changes when exiting the BIOS. According to the documentation its ...

...boot device priority or something similar, and choose the priority to boot from a USB HDD higher than your Hard drive. Just to be sure, put it as number one. Save the settings and exit, and restart ...

...device -- insert boot disk and press any key The PXE ROM is part of your system's network interface controller. It is being entered on your system's startup to look for a bootable image on a physical ...

...device -- insert boot disk and press any key" The PXE ROM is part of your system's network interface controller. It is being entered on your system's startup to look for a bootable image on a ...

...device. Insert boot disk and press anykey" First thing, check to see if the is a floppy disk inthe floppy drive, if so removes this disk. If there was no disk in the floppy drive then it maybe a hard ...

...Boot Device Toshiba Portege R100, I can not boot from USB Device and can not change bios boot priority bios boot priority is invisible it like this HDD-Floppy-USB CDRom- now it can boot only from HDD ...

...xp) hi.. If you want to boot with your usb flash drive, go to set up upon starting..then go to bios setting..not cmos.. Then look for the booting device and check the usb HDD.. hope it helps..

...boot media device help Remove any USB stick before booting up. When you start your computer press DEL/F2/F1 to initiate the DOS screen, select or change the boot priority to HDD and it should work ...