Mitsubishi WD-73827 73" HDTV DLP TV "tv screen problems spots" Questions

...objects on the tubes, lenses or inner-screen, such as dust or bugs.l Remove screen from the front and observe. If it were a TV problem the spots would be near the center of the picture. Good

...screen off and take off the panel i nthe middle of the tv with 2 screws in it and there will be an area that has 3 metal fins covering thin orange ribbon cables. the 3 square objects at the end of ...

...tv is on, you will see it better, you can reach in there with a soft cloth, or swiffer sweeper, if it doesnt have those doors, then you will need to take the screws out around the screen , from the ...

...tv mitsubishi 62 in DLP hdtv has 2 small black spots on bottom of screen and think maybe my son could have sprayed water on it. Not sure since could not find any evidence of water but the black spots ...

...screen started with two more every day can it be fixed ??????????????? Sine the TV's a rear projection DLP and the problem "grew" over time, perhaps those white spots are... DUST!!! Try a vacuum ...

tv screen this problem is coming from your DMD board it looks like some LCD chips are getting stuck in the on or off position you need to replace the light engine system to fix this problem check this

...way is to replace the LCD screen, that's the expensive part of the LCD TV. its the one factor be checked when buying an LCD TV or LCD monitor. thanks,.........try to help me too by

...screen. When the TV is turned on the spot is still noticable. I called the Business and had them to come and get the TV to repair it. I was informed by the business that there was nothing they could ...

...the whole entire Light projection Egine. i have a 65 in mitsibishi wd65731 the picture when i turn on the tv is vertical black and white stripes all the way across the screen, is it the light

...TV and the logo come up, are the spots still there? If they are then your light engine is bad and needs to be replaced. If they go away, then your digital board needs to be replaced. And yes you can ...