Haier HLP21E Top Load Washer "clean pin trap" Questions

Ad

Question about Asko Washing Machines

1 Answer

...pin trap will not screw back into the washer I unscrewed the pin trap, cleaned out all the coins, and now I can not screw the pin trap back into the washer. No matter how hard I push the pin trap it ...

Ad

...the quick start guide no owners manual. Thanks You can get a PDF owners manual at: http://www.askousa.com/customer-care/technical_documentation/ Page 23 show the pin trap and how to clean. Good

Ad

Question about Asko Washing Machines

1 Answer

...clean the filter and drainage pump: 1. Make sure the machine is empty of water and that it is switched off at the mains. 2. Open the hatch for the drainage pump as shown in the illustration. 3. Drain ...

...trap connected to pump (it was clean though). Is it safe to say its the pump? F22 is a low dram code. SUD means high suds. Most likely there's junk (coins, dirt, gunk, Bobby pins, etc.) Jammed in the ...

Question about Haier Washing Machines

1 Answer

...full of debris, clean it and install. If there is nothing in the trap, then you likely have either a jammed up pump ( bobby pins are notorious for this) or a failed pump that will need to be

...proceed through rinse cycle with same water, and sit at standstill and will not spin out water. Try cleaning out the trap. It is located under the door and can be accessed be removing three screws at ...

Question about Washing Machines

1 Answer

...properly due to some foreign object like hair pin,or coins.just clean it,check how,by using plies to remove and check how to return.carefully,and make sure the unit is in unplug before anything to ...

Question about Asko Washing Machines

1 Answer

pin trap where there was a coin and safety pin, but this has not solved the problem. The machine will spin when I turn the program knob to spin, but will not drain, even when I set the program knob to

Question about Asko Washing Machines

4 Answers

...pin trap in the first six months. Tried to do clean #2 tonite and cannot get into the trap. The manual sez to 'Unscrew the Pin trap cover and lift it out.' I twist the white cover, it comes off and ...

...trap and noticed that the pump impeller is not rotating freely, just half a turn left or right, could that be the problem? something stuck in the impeller like a hair pin, coin, button, bra wire ...

Not finding what you are looking for?
Haier HLP21E Top Load Washer Logo

155 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6687 Answers

Paul Carew

Level 3 Expert

3806 Answers

Are you a Haier Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...