Haier HTQ21JABWW Top Freezer Refrigerator "cold setting" Questions

...temperature set too warm • Defective compressor • Defective overload or relay Refrigerator too cold • Refrigerator temperature set too cold • Chefs Pantry control set too cold or misaligned ...

...cold setting should my fridge be on? I have a Frigidaire 21 cubic inch refrigerator with the freezer on top in my new rental home. It does not have numbers to set the temp dial it only has 0, cold, ...

Our LG LFC20760S refrigerator/freezer coldness setting is stuck. The refrigerator coldness setting is showing no values at all (and I can't update). The freezer coldness setting is stuck on 6 AND 7 ...

setting, max cold makes cold freezer, not reefer box!! if freezer makes ice its ok just set to cold which starves reefer box of air. add 2-3 gallons of water to the freezer and or reefer box, if empty

...cold enough at highest setting refrigerator not cold enough at highest setting. Temperature stays around 52 degrees F. Is the other freezer setting set differently? u cannot have both settings set to ...

...go from 8 hot to 1 really cold start setting at around 4 monitor the green vegetables in the bottom draw ( crisper draw ) and adjust if they show signs of too cold ( browning or wilting of ...

...cold even though the thermostat is on the coldest setting. Any suggestions about what is wrong? ITS NOT A GOOD IDEA TO USE THE COLDEST SETTING CUZ WHAT U WILL GET IS EXACTLY THE OPPOSITE A MORE WARM ...

cold and the freezer items melt. Setting it to 5 is what the manufacturer recommends. If you set it to 1 and the frig is still not cold, then you probably have a faulty cold control (thermostat) http:

...setting, still too cold, below 30. What is the problem? check the freezer compartment temperature.should be around zero.if it is around zero but to cold in the refrig compartment you would be looking ...

...stuff like that sounds like you may have a faulty cold control the cold control has two settings a cut on setting and a cut out setting you cut in setting may be bad id replace the cold ...