Haier SS Half Kegerator "freezer won 39 coole below" Questions

...won't cool but freezer working fine fridge won't cool but freezer working fine Its defrost problem, the freezer should cool, then freeze, then defrost cycle should start. In your case freezer is ...

...freezer won't go above 20 Hi, Check out these tips...they can help you figure out what is going wrong withyour refrigerator and why it is not cooling Refrigeratornot Cooling or Fridge not Cooling ...

won't cool Its defrost problem, the freezer should cool, then freeze, then defrost cycle should start. In your case freezer is cooling, then freezing, but its not defrosting. That's why fridge

...won't cool the fridge below 48 degrees, or the freezer below 43 degrees. The front was hot prior to the outage (front strip between refrig/freezer compartments). I did clean coils as best as ...

...won't cool below 7 degrees could this be a problem with the fan as it was making a odd noise the other day...Regards Charles Fridge should be 33 to 36 degrees Freezer 5 to 10 Thanks Leo Ponder ...

...freezer. Thanks. James Taylor Since you say that is isn't cooling properly, I would first start off by cleaning the condenser grill that is located under the cabinet. While this won't correct ...

...won't come out. Is it the electronic board? The freezer temp reads "0"the fridge temp reads "45". It feels like "45" in both.:0/ Very expensive units should be better than this! You can fool with ...

freezer won't freeze . Someone told me that on the freezer inside behind the panel it freezes up so thaw it out and it will work again . I thawed it out and it kept the right temperature for about

...won't cool down, but freezer works FREEZER FAN MOTOR MAY NEED REPLACED. THE EASIEST WAY IS TO TAKE OFF THE BACK PANEL IN FREEZER AND REMOVE THE FAN MOTOR, TAKE IT TO THE NEAREST APPLIANCE PARTS ...

...won't drop below 55 my freezer isn't freezing ice cream melts, its done this twice when we have glitches in power doing a storm thaen it takes a week or two then runs great now back again ...