...cold but refrigerator is warm the air damper control might be stuck closed or broken The Evaporator Coils are Frosted Over If the freezer is cold but the refrigerator is warm and the evaporator coils ...
...is not getting cold enough to freeze. I took the back off and found a bunch of ice build up on the coils and cleaned it off. The coils instantly got cold but the freezer never got cold enough to ...
...cold. refigerator side seemes ok. I checked coil and it is NOT icy. If the coil is not iced up then it is not a defrost problem but rather if the coils are not completely cold all over then the ...
Question about Kenmore Refrigerators
...coil is freezing up, the remaing coils are not getting cold. Problem with a kenmore with top freezer. Not cooling to correct temp. The top cooling coil is freezing up and the remaining coils are not ...
Question about Samsung Refrigerators
...cold air from the freezer coil to the fridge? Samsung RS267TDBP The cold is transferred by the gas coils . there is a fan to cool the hot gas at the compressor . some freezers have a fan to circulate ...
Question about Kenmore Refrigerators
...cold and have some frost just on the upper 1 inch but not the rest of the coils. Evaporator coils are not frosted over. I wanted to check the thermistor but I cannot find one. Most videos show the ...
Question about Whirlpool Refrigerators
cold air through solid ice,remove this panel and defrost the coil,then check the defrost heating element below the coil,the defrost thermostat located on the coil or the defrost timer itself for being
...started out with the refrigerator side not getting cold. found the defrost heater no good and coils froze up.. replaced heater and the defrost t-stat and defrosted the coils. worked good until ...
Question about Zanussi Refrigerators
part of this coil is not cool nor cold. Is it the coil heater or the Defrost timer or is it maybe low on refrigerant? Please help me . This unit is 5 years old only! Who manufactures this refrigerator
Question about True Refrigerators
from coming on until the coil get cold. Generally, about 26 or so degrees. Either the coil is not getting cold enough or the therm disc is not functioning. This prevents warm air from being circulated
17 questions posted
Usually answered in minutes!
101 Questions
46 Questions
20 Questions
27 Questions
30 Questions