Stanley Fatmax Xtreme Retractable Utility Knife "put back together" Questions

...put back on item and squeeze the handles together it should lock if you cant squeeze the handles together then back the knob back out until you can get the handles to lock or screw in if still too ...

cant put the thing back together after putting in new blade !!!fat max knife some stanley knifes require stanley blades only, or make sure the clip blade is in is seated in the grove completely.

...the plunger so that you do. 7) Drive to the dealer BEFORE you put the dash back together, buy new switch, replace it, drive home, drink beer, put dash back together. Taken from another site.

...put the rewind back together? Is it better to purchase a new unit? well its not an easy job but it can be done,,,,first you need to put the pully on the spring and wind the spring up tight so it will ...

...clockwise and the case should split in half, the blade is held by a magnet, prise the old blade off and replace with new one, then put case back together and tighten gold wheel clockwise

...I'm OK with that. I suggest you remove the thimble and spray the threads both inside and out with carb cleaner and blow it out good and then lube it and put it back together and just keep working ...

...put it back together do you remove the round plate at the bottom to insert this small rod? An exploded parts diagram is available ...

...Put it back together and test. If it doesn't work then you have something mechanically out of alignment or electronic values have messed up, and you have have to bring it somewhere for

...put it back together spray with graphite first to clean put plunger back in side of door first then put lock side that has long rod sticking tru line up screw holes with holes in plunger then line up ...

I took it apart and inspected it. Mine was a loose connection and after some fiddling with the wires the laser came back on. Put it back together and haven't had a problem with it since. Hope it helps