idle control circuit on a printed circuit board inside the control box. The other wires from this board go to the idle control switch, the power regulator/exciter board, and the idle control solenoid.
...idle, idle control not working. I have a Generac 4000xl that sat for about a year. I replaced the oil, filter, fuel, charged battery etc. The unit starts and runs but my idle control doesnt do ...
...idle control valve (Connected with black and yellow wires) and the Auto Throttle Unit. Start Generator Check for 12VDC on the Yellow wire of the idle control valve. Yellow is positive to any good ...
Question about Electrical Supplies
idle control switch is thrown. I have a generac 4000XL. Starts and runs fine, UNTIL I throw the idle control switch to ''on''. When I throw the switch, the engine dies immediately. A year ago it would
Question about Porter Cable Electrical Supplies
...idle/RPM control solenoid that adjusts to the load on the generator. I can see that the solenoid works because 9VDC applied to it activates it. The stop control switch seemed to test out OK with an ...
...speed. The linkage to the carb is ok and throtle on carb works fine. I posted an answer to a similar question here. You probably have a broken current transformer or a bad idle control board. Rate
...in the owners manual if Your generator has an idle control setting. Even so, as soon as you plug something into the generator, it will rev up to full speed, even if you just plug in an extension
Question about Coleman Electrical Supplies
...idle solenoid does not work when you throw the switch to auto. Switch is good, replaced the solenoid, still does not work. Any ideas? Generator runs fine at full speed and puts out 120/240 volt and ...
...idle control doesnt work, the generator idles fine but when you plug in a tool and try to run it nothing happens. if you manually advance the throttle the tool gets power.. check the spark erestor ...
...Idle Control Hello I have a Coleman Powermate Premium Plus 6875. Model # PC0495503 13 HP Honda GX390 (VXG* GCAA-4003947) The generator works fine when I adjust the idle up high. But when it is ...
182 questions posted
Usually answered in minutes!
50 Questions
1 Questions
15 Questions
