Hobart 24 in. LXIH-3 Built-in Dishwasher "lxi error code" Questions

LXI high ... Jan. 5, 2014 My hobart am15 display a p3 error code and i make - Fixya May 1, 2010 SOLVED: Error code "p3" appears in the digital panel with a ... May 12, 2010 More results from www.fixya

...LXI high temp P3 code refers to the probe near the airgap at the back. It is monitoring the rinse temp. P2 is the booser probe, and P1 is the wash tank. The control board will store error codes, so ...

...lxi dishwasher that has an e7 error code and it dry fires the sump heater between wash and rinse cycle, which seems to have a long delay. we swapped the main board and also the sensors in back and it ...

...you may have a faulty sensor or wiring. LXI H, leaks out around bottom of door only when unit has not been run for a couple of days and hold water in washer after use. Error Code E7 what does this ...

error - machine is not draining - check drain hoses - pull out machine if needed - check air gap. hope this helps. jimmy. I had a Hobart Technician come out and service my LXi. He first went after the

...LXI dishwasher. What does that mean PD is not an error code. It shows that when it draining water out shortly after power-up and when shutting down. If it seems to be showing "PD" longer than usual, ...

...Error code E7 ? LXI H, leaks out around bottom of door only when unit has not been run for a couple of days and hold water in washer after use. Error Code E7 what does this mean ? I found this and it ...

error. We unplug power to the unit let it set, replug it back in after 3-4 cycles of this, it will eventually work perfect for the entire day. I have replaced the Sensor that is on bottom front of the