Jura Capresso Impressa E75 Espresso & Coffee Maker "machine close tap" Questions

...Close tap loop is entered because the machine doesn't see any or not enough water flow when the pump is on. If you see that water is flowing out of the tap when open, then the flow sensor most likely ...

...close tap, where is tap please Only just bought machine, and cannot get it to work The tap is the dial on the left turn it, then it will turn the tap off. If it is repeating this then it may need to ...

...machine asks to open tap ,i don't know how If you gind too fine, it will overload the pump and result in the "open tap" a few seconds into brew. Rinse and gind coarser to clear out malfunction. The ...

close tap. We called the support lines 3 times at Jura and we are getting what apears to be a run around. They are claiming that the machine needs cleaning on the coffe beans used are no compatible!!!

...close tap prompts. I'm not able to get to the 'rinse unit' or 'select product' choice. I have shut it off and still the same. I suspect that the unit is not filling with water as there is no water ...

...close tap" Machine very slow; makes coffee only sometimes when running That Sounds like theres a blockage, most likely limescale has built up in the boiler. If you try descale now when water is ...

close tap I'm in the same loop , i have an ENA5 jura.. Try using warm water in the watertank, important that the water is not too hot, it can cause leakage in the o-rings in the fluidsytem. Repeat the

...Close Tap Message Jura S90 hasn't been used for many years. When unit is powered on it displays CLOSE TAP. The unit cannot be used for any function. Any help in diagnosing or resetting the unit would ...

...close tap. I have unplugged it and it still continues the loop. I have had this happen when trying to change filters and go through the rinse procedure. For me the problem was that the little hole on ...

...tap-machine stated that it was filling system- I closed tap when instruction. The open tap remained on because no water was filling system. I took the frother tip off and opened tap. Water filled ...