Jura Capresso Impressa S9 Coffee Maker/Espresso Machine "machine put tray" Questions

machine will dump whatever ground coffee directly in the tray but after that you will be able to remove the tray and put back the complete assembly including the used grounds bin. This has happened to

...went away when I put the tray back in. Empty Tray, Missing Tray game: Cool down the contacts on the tray with cold water, then put it in wet and wait a few seconds for the sensors to cool down.

...machine will stop in the correct position. You can remove and clean the tray, and put the full assembly back in. I've had to do this a couple of times and it has always worked. I think you can fix ...

put the tray back in to the machine with the paper towel on it and then pull it back out. The paper towel will clean the slot inside the machine. According to the Instruction Manual section 21 page 68

...machine in and turn on again. Most times the malfunction clears and the grounds end up in the liquid catcher tray. I then remove the tray and put the container for the grounds back in and continue ...

...put it back in but now it says tray empty and won't work Check the two contacts at the back of the tray. Be sure they are cleans as well as the plastic space between them. Then using compressed ...

put in the grounds holder, the tray won't go in. It is hitting something in the back of the machine Place the tray into the coffee maker without the basket and run one cup of coffee Replace the basket

..."Tooth Pick" simply press the switch inward (to the right) and hold till the machine cycles the Levcer / Flap up and out of the way.! Put your tray and grounds container back in and begin brewing!! ...

put back into position the tray missing message returns. Have cleaned the machine and cannot work out how the machine senses the tray is in place. Clearly, the drip tray is not aligned right, or there