Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
clean out all the used ground that is stuck inside the brew unit; use your fingers or a toothbrush maybe. Then run the cleaning program. It may be smart to run the program once or twice after this too
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
...having to work too hard to move the brew unit up and down. This is usually cured by disassembling, cleaning, replacing any o'rings that may be bad, and lubricating the unit, then reassembly. I have ...
...problems with positioning it self. Use your finger and clean out all used ground from the brew unit you can find. Start the cleaning program with tablet, hopefully you will get around the error
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
...clean unit I have run the clean process with the tablet 2 X , but the machine keeps beeping to be cleaned. I use brita filtered water & thought to decalcify the machine for the 1st time. Maybe that ...
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
...This should solve your problem. If it doesen`t, i could be that the o-rings inside the brew unit is defective and needs to be changed. pull put drawer clean wipe out then spray pam. . It will then ...
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
Water leaking jura s9 I have put the brewing unit into pieces, cleaned it, reassembled and it works. However, before cleaning as well as now the machine is leaking water from bottom. What to do? The ...
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
...unit could be clogged, and you need to clean this out. Put a finger up in the brew unit just along the grounds blade, you will probably find a lot of old fine coffeeground up the. Clean it up as best ...
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
...unit grinds about 1/3 of what it should now, and produces wet grinds in the tray. The manual feed of ground coffee works fine, so all else seems OK. Thanks in advance! Usually water in the grounds ...
unit can`t move to the right position. This means usually that is full of used grounds and needs to be cleaned. Use your finger and clean out everything stuck inside, and then run the cleaning program
Question about Jura Capresso Impressa Coffee Makers & Espresso Machines
...clean enough and started to register waterflow again. The unit entered into Spooling (and heating) mode and was 'Ready'. Clean the unit and flush it a long time with fresh water. Now it is OK
152 questions posted
Usually answered in minutes!
151 Questions
141 Questions
110 Questions
37 Questions