Jura Capresso Impressa F9 Espresso Machine "replace open tap" Questions

OPEN TAP message is displayed and the machine will not work Instructions from Capresso: -pull out the drawer -look inside the unit where the drawer has been removed and look for a flap (it's really ...

...replace the grounds bucket afterwards. As mentioned this is because the flap gets out of sync, I believe I caused this by having too much powder in the powder container. I too have had this problem ...

...Open the top of the machine. On C60 and C65, there are two OVAL head screws on the back. If you don't have an oval head driver, you can grab them with small vice grips and work them loose. At the top ...

Open the top "pre-ground" door and peer in. With the wooden spoon handle, poke in there and tap everything to break up any stuck things. I thought a shopvac with a small tube might work here, too, but

...Replace everything. Works like a champ! So glad I didn't have to return our 3 day old machine! The rep states that this is a common problem - asked him why it isn't in the manual and he had no ...

...Open the top of the machine. On C60 and C65, there are two OVAL head screws on the back. If you don't have an oval head driver, you can grab them with small vice grips and work them loose. At the top ...

...open under the new OS. Anyone have a user's guide that can tell us how to use the plunger? On mine, I found that the black float in the water container (in an oblong plastic box near the place where ...

...want the open tap and fill the system? Is there a specific part I need to replace? TRY SWITCHING IT OFF AND RETRY LATER MAY BE IT WILL RESET IF NOT CHECK FOR ERROR OR TELL US MORE ABOUT THE ...

...help The brewhead is blocked the machine will have to be stripped and cleaned and the o rings

...tap body installation. If you open the machine, you will find the tap body is made of toughened plastic. This is inferior, and should be replaced with a brass tap body which can be purchased directly ...