Razor MX500 Dirt Rocket "sprocket chain" Questions

Ad

Question about Razor Cycling

1 Answer

...chain, then tighten the rear axle nuts. *Make sure that the rear sprocket lines up with the front sprocket*. Just lay a straight edge along the two sprockets, ( A yardstick will do), and make sure ...

Ad

...are all connected and turn together as a unit. The chain could be skipping over the teeth on individual sprockets. I suspect severe chain and sprocket wear. ...

Ad

...Wind the chain through the rear sprockets, grab a hold of the rear sprocket and rotate the smaller sprocket towards the pedal, that should give you enough slack to put the chain on the front ...

Question about Pacific International Cycling

1 Answer

...and then between the upper and lower derailleur wheels. It then goes forward toward the front sprocket. The text sketch below shows the rear sprocket, chain and derailleur.I hope this helps. (O o) ...

Question about Cycling

1 Answer

...sprocket and chain to the other 2 parts and in what order if you just have the one rear sprocket and one front sprocket put the chain on the small one first then start the chain over the big sprocet ...

Question about Columbia Sportswear Cycling

1 Answer

...chain skips over sprocket sometimes This is usually the setting of the rear shift. Check that the rear d?railleur is properly aligned when it is set to the middle sprocket in the cassette. The chain ...

Question about Mongoose Cycling

2 Answers

...chain on the back sprocket. If this is a single speed bike then place as much of the chain as you can on the top of the front sprocket. Once it is partially threaded you can crank pedal around a half ...

Question about Avalanche Cycling

1 Answer

...chain? This varies from model to model. Check that with the largest rear sprocket, and the largest front sprocket that the derailleur lower arm is not pointing straight forward,and smallest front and ...

chain sprocket not locking to wheel hub. Now the sprocket is not releasing from wheel hub and chain keeps coming off if not continually pedaling. Sounds like the freewheel mechanism is jamming up. You

Question about Cycling

1 Answer

...chain back on. Your rear sprocket is worn. As your put the pressure on the pedals the chain is riding over the teeth and makes a crunching sound. The teeth could appear slightly hooked. You will ...

Not finding what you are looking for?
Razor MX500 Dirt Rocket Logo

151 questions posted

Ask a Question

Usually answered in minutes!

Top Razor Cycling Experts

Lawrence Oravetz

Level 3 Expert

10543 Answers

Wayne Fraser

Level 2 Expert

83 Answers

ray gallant
ray gallant

Level 3 Expert

64309 Answers

Are you a Razor Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...