Question about KitchenAid Dishwashers
...reset its circuit breaker for twenty minutes. No luck though? I'm now searching boards for any help that someone maybe able to offer. If you need any additional info, please don't hesitate to contact ...
reset procedure for any control board would be the following sequence (standard electrical safety and common sense rules apply): remove power (unplug, turn off circuit breaker, etc.)access the control
...reset procedure for any control board would be the following sequence (standard electrical safety and common sense rules apply):remove power (unplug, turn off circuit breaker, etc.)access the control ...
...reset the machine so I am going to go try that. I expect it to work. 99% of the time it is the thermal fuse on the control board. I have seen this about 12 times now. In one of the cases i found the ...
...circuit. I tried to reset the error mode by turning off power for 15 minutes, however, that did not work. We called for a repair. The service person found that the dishwasher was completely fine ...
Question about KitchenAid Dishwashers
...reset the control board, then check to see if it works. If not, the control board has a break in the wiring or the keypad is no good. I have Kitchen Aid model KUDIo2IRBS which had the same problem of ...
...reset the console. Do this by closing the door and press these buttons in sequence... -high temp wash -heated dry -high temp wash -heated dry ...all the lights will turn on briefly and the machine ...
reset switch. So, we pulled off the circuit board cover (removal instructions on the cream colored cover) and used a hair dryer to dry out the contact / sensor - wherever it is on the board. Note that
...circuit board you see. Soak up as much as possible and you can use a hair dryer to get the tough spots. Now try to find the resson for the water. I had a mouse living under mine. Look for a break in ...
680 questions posted
Usually answered in minutes!
217 Questions
151 Questions
124 Questions
109 Questions
91 Questions