...glass companies that make shower doors. I also have a problem with my glass door. My door is assembled to rollers which slide in a track. I think that after all the years of humid air the rollers are ...
Question about Sterling Plumbing Home
...glass, one fixed side and one sliding side. The sliding section is on a ''track'' attached top and bottom by small black clips that each have a roller wheel. curved cut glass will not always be the ...
...glass doesn't slide smoothly. It seems to bind in the middle of the bottom support track; it moves, but not as freely and quietly as it should. Please clarify - you said it's a pivoting door but also ...
Question about Home
...glass door which has three doors. One of the door always comes off when I slide d open most shower doors are held in by the rollers some are adjustable if yours arent check to see if the spring is ...
is there a way to put the glass back in the track on a swinging (not sliding) door no you need to replace the door,they are factory pressed.
...glass. Home Depot will likely only sell the whole kit, not the individual doors off the floor. You may be able to special order just the doors through Home Depot or you may have to contact Sterling ...
shower door off track the inside door is off track It's usually best to take the OUTSIDE door off in that case; and start from the INSIDE, then do the OUTSIDE. The track wheels MAY be reversed on ...
...need to be bolted to the floor. and bolted from the 2 upper rails. then you can attach the doors. make sure the tube is well secured. the door weights about 12lbs-15lbs each ( depended on the
...glass is lower than the other ones.How do I get it even so it slides smoothly? Thanks. The top rollers should have adjustments on them to bring the door to horizontal as it swings accross the track. ...
9 questions posted
Usually answered in minutes!
