Question about Moen Home
...in moen single handle tub &shower faucet reverse hot & cold water After installing stem cartridge the hot and cold water changed sides why remove and turn cartridge 180 degrees then ...
Question about Danco Home
...cold water off that is running If your having major issues, I would try to locate the main on/off valves at your water heater and pump/cold water line in the basement. One the water is shut off, I ...
...cold. Phillip screw or allen nut back of handle. You will see a brass valve stem the handle was attached to. Use a crescent wrench and unscrew the stem and pull to remove. Ar the bottom of the stem ...
...cold if u have install paperwork that has info on how to adjust if not remove handle and on valve stem will see blue and red plastic clips slid them forward and adjust till hot water is adjusted to ...
...cold valve... One of two things has happened. I'm assuming you only get hot water when you open the valve and that this is for a single handle control shower fixture. If so either this is the wrong ...
...cold supply lines pressurized to each of the faucets. The problem is that no hot water will come out of either faucets. Their seems to be plenty of hot water pressure up to the faucets but none comes ...
...faucet. Changed direction for cold water. To turn water completely off, faucet handle has to be in the middle, pushing it all the way back turns the water on again. Change the O rings in the
Question about Delta Home
...a double handled shower. When turning the handle cold back to the stopping point lets water out like its being turned on? check that the stem was in the central position before the handle was ...
...cold water coming out of my shower when I turn it to both positions Thanks Providing you have hot water everywhere else except shower, you have a bad mixing valve. Turn water off to your shower. You ...
60 questions posted
Usually answered in minutes!
50 Questions
7 Questions
2 Questions