Saniflo & Saniplus& Macerator Pump  "check valve" Questions

Ad

...Check the float assembly or the refill valve assembly, make sure it hasn't bound up by getting caught on another part inside the tank. 3.) Check the water level to make sure that it sits about 1 inch ...

Ad

...Check the shut-off valve on the tank to make sure it's shutting the water supply off as it should. If the tank has a mechanical arm(the flush lever), check it to see that it is allowing the shut off ...

Ad

...valve. check water level to ensure not overflowing into flow valve. if that's the case, lower water height. then if still doesn't work, change flapper, all else fails, change flush valve. good luck, ...

Question about Jacuzzi Home

1 Answer

...check for a clog in the toilet valve supply as the washer can deteriate or the old piping in the house can clog if they are old and made of galvanize pipe or the fill valve is clogged. replace valve ...

Question about American Standard Home

1 Answer

...check valve to see if grit or blockage is in the toliet valve.........Depends on valve design to whether or not you will be able to clean....may have to replace toliet valve with new one......hope ...

valve. You will also want to check the water coming into the toilet by turning off the water that supplies the toilet and disconnecting the water supply line. After removing the water supply line turn

Question about Saniflo Home

1 Answer

...pump. Water could be leaking from the check valve on the discharge elbow into the pump or from the toilet tank into the bowl. Inspect the flapper on the check valve and the flapper on the flush

valve stops Check the little tube the goes from the fill valve into the overflow tube. You NEED to have a good arch in the tube to prevent back siphon from the tank. If that doesn't work then check to

Question about Saniflo Home

1 Answer

...check valve on saniflo where is the check valve? Jim:The check valve should be the fitting coming right out of the unit. It is a one way valve that only allows the unit to push water out. The check ...

Question about Home

2 Answers

...tank with putty knife where new valve will seat. Install new valve, attach supply line, connect overflow tube. turn on water. Check for leaks. Repeat if necessary. :-) GO ON LINE AND LOOK UP ...

Not finding what you are looking for?
Saniflo & Saniplus& Macerator Pump  Logo

346 questions posted

Ask a Question

Usually answered in minutes!

Top Saniflo Home Experts

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Saniflo Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...