KitchenAid KERC507 Electric Kitchen Range "stop button aid" Questions

aid electric range/oven. Model #YKERC507HW4 and button #2, #4, and "timer set/start" buttons stopped working. Any ideas on what may be the problem? This may sound facetious, so don't get offended. Did

...Aid they stated that it will remain locked for 24 hours to cool down and then should come back on line. It has not. have tried the hold LOC button for 5 seconds, hold time set button for 5 seconds. ...

...stop time button" and set the shut off a minute later than the time showing on the range's clock. This is a common fault on this type of ranges, the board has to be replaced. The manufacturer ...

...aid stove stopped working with noise of short circuit.When opened the switch board panel the left rear swith had a burning mark. After replugging in the panel shows no light and when any of the ...

...button doesn't so you have to throw the breaker to turn off stove. Ever heard of that? I am having the same problem with my oven controls. All other functions work properly. The only way I can turn ...

...button to open it or if you have to bust it open to release contents inside! STOP Try this reset feature and see if I can help you open it. 1.Turn everything of on the range and oven. 2.Go to the ...

...button. The self clean function is a way for the makers to get revenue from broken parts and lulling you into thinking you get a clean oven. The typical things to break are elements, fans, door locks ...

...button it automatically goes to delay start. I want to do it now. I have pushed stop multiple times and nothing changes??? Thanks for any assurance Unplug the power and cancel it. Never Ever use the ...

...stop/clear button on he bottom right of the key pad for 3 consecutive seconds releases the lock. The locked oven wording will blink for about a minute and then the oven is released completely. So ...

...stop. You'll see a metal tab swinging from side to side. I stuck a coat hanger in there to hold it to the side while pulling on the door, and got it to open. As far as the reason for the "dead oven" ...