...test for either part. Take the machine apart and look at the board where the control know is mounted to see if there is anything obviously cracked or broken. If the mixer was ever dropped on its side ...
...mixer body. Best to disassemble and test cord with VOM meter. Often cord and break internally and show open circuit only when cord bent a an angle. Next< i would look at the speed mixing switch, ...
Question about KitchenAid Food Mixers
mixer on. Next the cable, do you have continuity from the wall plug to the control board on phase & neutral, (Check green earth wire as well for the sake of safety) that will be the black wire and
...circuit board for cracks, or burnt components. Then suspect the triac/tyristor. Desolder it and test it with a multimeter. (google "test triac multimeter"). Then note the code on the front of the ...
Question about Hobart Food Mixers
...mixer won't start. There's no hum, the timer switch does not count down to make noise it's just as though there's no power to the motor. I've taken a multi meter to all the wires from the outlet to ...
...mixer won't come apart. I would like a suggestion as to how to get it apart, or where I can get a parts diagram. I have tried several online parts listings with no luck. (my model is XAAS) you can ...
Mixer is not turning on. Control board? I recently took apart my Kitchen Aid and put it back together. It will not turn on now. I took out the carbon brushes, the phase and control boards, and pretty ...
26 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
183 Questions