KitchenAid KSM150PS Artisan Series Stand Mixer "wont control speed" Questions

...wont my classic kitchenaid mixer switch off when mixing my kitchenaid goes from switch off and jumps back on at speed 1why Good Morning, There is a spring inside your mixer attached to the speed ...

...wont turn off unless I unplug it. The speed, control whether its on or not doesnt work. Something is amiss under the back cover, unplug it, remove the cover and have a look. You may need a meter to ...

KSM90 WONT TURN ON Check for a broken wire under the rear cap on the speed control plate. Check the carbon brushes, they may be worn out

...control plate and to the lever arm, Item # 3. Here is the diagram: http://shared.whirlpoolcorp.com/assets/pdfs/literature/Repair%20Part%20List%20-%208212369.pdf Have the same problem. The spring is ...

...wont start Mixer starts then stops Check for broken wire under back cover. Check operation of switch contacts on black speed control plate. Check carbon brushed under black screw caps on the sides. ...

...wont stay turned off it springs back to number 1 speed so i have to turn off via plug socket Hello Shelley, The speed control lever is operated by a spring and metal extension bar attached to a pivot ...

...wont turn. Is there a reset button or a way to fix this? It sounds like you burnt the motor out or shorted the speed control. replace the nylon cog. The same happened to me - must be a design

...wont turn on Removed side screws Not near enough info to solve this one. What happened last time you used it, have you checked the wall outlet (yes I know but still check it) next it could be your ...

...wont operate correctly. The next possible solution is that the main control board is faulty and would have to be replaced part number for the board is w10119326. Also I have added this link from ...

KITCHENAid rrk5a wont start Check the carbon brushes first, they only go in one way so be awake. Next check the wires connecting to the speed control plate under the rear cover,